Headlines News :
Showing posts with label peugeot. Show all posts
Showing posts with label peugeot. Show all posts

Peugeot to Put Compressed Air Hybrid Technology Into Production by 2015


Peugeot is working on making its HybridAir technology, which uses compressed air to boost a small capacity petrol engine, available for its road cars. Just like an electric motor, the Hybrid Air system can operate in zero emissions air mode, with compressed air used to drive the hydraulic motor, which then turns the transmission and the front wheels.

The system can also operate in petrol-engine-only mode, or petrol and air altogether. The compressed air tank is refilled by a hydraulic pump under deceleration or braking.

Showcased on the 208 Hybrid FE Concept, Peugeot’s Hybrid Air technology could lead to production cars averaging 100 mpg UK (2.8 l/100 km). According to a report from AutoExpress, the French carmaker won’t bring the technology to its road cars earlier than 2015, but when all details will be sorted out it expects improvements on the 100 mpg figure.

On a typical B-segment car like the Peugeot 208, the technology could bring an average fuel economy of 97.3 mpg UK (2.9 l/100 km) and CO2 emissions of 69 g/km. That would be a serious improvement over the most efficient 208 in the range today, the 1.4 e-Hdi, which emits 87 g/km.

Using solutions from the 208 FE Hybrid concept, Peugeot believes efficiency figures can be further improved to around 141 mpg UK (2 l/100 km).

By Dan Mihalascu


PHOTO GALLERY

Peugeot-208-FE-Hybrid-1Peugeot-208-FE-Hybrid-2Peugeot-208-FE-Hybrid-4Peugeot-208-FE-Hybrid-5Peugeot-208-FE-Hybrid-6

Peugeot Reconsiders Alliance with GM as it Looks to China for Help


France’s largest carmaker PSA Peugeot Citroen has said that its alliance with General Motors may be scaled back, sparking speculation that it is doing so in preparation for a deeper partnership with China’s Dongfeng Motor.

The carmaker, which recently posted a 3.7 percent quarterly revenue decline, said plans for a joint small-car program with GM are “under review”, despite having announced earlier this month joint production of B-segment MPVs in Spain.

“The project of development of a new joint platform for B segment models with GM is under review as well as the relevant terms of the development agreement. As a result, the announced mid-term synergies ($1 billion for PSA) may be readjusted downwards. New initiatives are under consideration,” Peugeot said in a statement.

Peugeot is currently in tie-up talks with its Chinese partner Dongfeng Motor. Dongfeng and the French have stated that they are considering taking equal stakes in Peugeot of about 20 percent in a capital increase that would raise at least €3 billion ($4.13 billion). While the GM alliance is focused on cost reductions in the shrinking European market, a partnership with Dongfeng would help Peugeot expand in China and boost its profits.

Peugeot and Dongfeng currently operate three factories together in China, with annual production capacity expected to rise by two-thirds to 750,000 vehicles until the end of 2015. Peugeot’s sales in the first nine months of this year in China rose 29 percent to 403,000 vehicles. Peugeot has a second joint venture in the country, Changan PSA Automobile, and opened a fourth factory last month.

Should PSA Peugeot Citroen pursue a deeper partnership with Dongfeng, it would risk the GM alliance, since GM’s Chinese partner is SAIC Motor, a rival for Dongfeng. If that happens, GM may pull out of the alliance with PSA and sell its 7 percent stake.

By Dan Mihalascu

Story References: Reuters & Bloomberg


PHOTO GALLERY

GM-PSA-CEOs-1Peugeot-City-1Peugeot-City-2Peugeot-City-3

Euro NCAP Crashes Jeep Cherokee, Mercedes CLA, Suzuki SX4 and Peugeot 2008


The latest roundup of cars put to the test by Euro NCAP succeeded in achieving the maximum possible five-star score. Jeep’s Cherokee, the Mercedes CLA, Suzuki SX4 and Peugeot 2008 all impressed, though the European crash safety authority doesn’t currently have an equivalent to the small overlap test, the one that’s been troublesome for so many apparently safe cars.

But regardless, at least the stability control test is not only relevant for testing the ESC, but also for seeing if a vehicle’s chassis is up to scratch – the Opel Adam from the previous batch of cars showed it had a big tendency to understeer. Here, out of all four cars tested, the Suzuki seemed to have the straightest trajectory, and it runs a bit wide with the electronics turned off…

No other notable occurrences to report on, aside from the fact that for the Peugeot 2008, much of the crash data was taken from the 208 supermini on which it’s based – it shares its basic structure. It even suffers from the same high chance of giving passengers whiplash injuries in rear impacts, as the seats and headrests are not as efficient at culling this as they could be.

Check out the all six videos posted below; there are two for each car, bar the Peugeot, which doesn’t get any.

By Andrei Nedelea








PHOTO GALLERY

EuroNCAP-1EuroNCAP-2EuroNCAP-3EuroNCAP-4EuroNCAP-5EuroNCAP-6EuroNCAP-7


VIDEO


















China's Dongfeng Reportedly Planning to Buy a Third of PSA Peugeot-Citroen


Volvo seems to be doing fine under Chinese ownership, even though most were understandably skeptical, immediately after hearing about that controversial deal going down.

We’re bringing this up now, because another traditional European manufacturer, PSA Peugeot-Citroen, is having serious financial trouble and according to a recent report, China-based automaker Dongfeng is looking to grab a third of the company’s shares.

Now going through its worst period of the last two decades, PSA “is examining new industrial and commercial development projects with different partners, including the financial implications that would accompany them,” said a spokesman, but concluding that “None of these projects has reached maturity at this stage.”

The Bloomberg source article reads that the Chinese would be willing to offer $1.63- (€1.2-) billion for 30 percent of the company, and while we can’t say for sure that it’s the exact amount they would end up paying, the link between the two companies is there, with official statements of interest from both sides.

PSA’s CEO, Philippe Varin did speak about this last month, saying that they did carry out preliminary talks, and their partnership would first be an industrial one, and only after that stage is complete would they talk about finances.

Dongfeng has been making Peugeot-branded cars with old PSA bits in China since 2004, so we could assume that that was part of the mentioned industrial partnership - the two companies are linked, so this report seems to be of the more plausible kind. We will follow it up when new information arises.

Note: The model pictured is the 2006 Citroen C2 built by the Dongfeng-PSA joint venture in China – and yes, it is clearly a Peugeot 2006 underneath.

By Andrei Nedelea


PHOTO GALLERY

Citroen-C2-China-1Citroen-C2-China-2Citroen-C2-China-3Citroen-C2-China-4

GM and PSA Axe Plans for Mid-Size Models, Narrow Their Partnership


Even though it hasn't been that long since General Motors and PSA Peugeot-Citroen announced big plans for an elaborate partnership, the two companies have failed to come to an agreement on a number of projects.
After dropping plans to jointly develop a small car for Latin America and a dual-clutch gearbox earlier this year, we now learn that GM and PSA have also scrapped plans for a joint mid-size car program that would have seen models like the next-generation Opel/Vauxhall Insignia, Peugeot 508 and Citroen C5 sharing parts.

Toyota Looks to PSA Peugeot-Citroen and Fiat for its New ProAce LCV


If you're a professional in need of a medium-duty van and for whatever reason, you don't like the Peugeot, Citroen and Fiat badges and/or the selling and service points of the aforementioned brands, there's a fourth variant of the series from Toyota.
The Japanese carmaker wanted to re-enter the light commercial vehicle segment in Europe after suspending sales of the HiAce van and decided it would be better to sign an OEM agreement with PSA group and re-badge the Citroen Jumpy / Peugeot Expert, which is also offered under the Fiat brand as the Scudo.

Peugeot 208 GTi in the Flesh from Paris and on Film in New Promo


While the Onyx, and to a lesser extent, the 2008 concepts are the most impressive models at Peugeot's Paris Motor Show stand, the French carmaker also brought along the production version of the 208 GTi that promises to rekindle the ideals of the original 205 GTi.
The new model's arsenal includes a potent 1.6-liter turbocharged engine that sends 197hp (200PS) and a peak torque of 275Nm (203 lb-ft) to the front wheels via a six-speed manual gearbox, and a revised chassis with new components and re-tuned suspension settings.

Peugeot Unveils Onyx Hybrid Concepts in 680HP Supercar and…Three-Wheel Scooter Flavors


Name the first French supercar that comes to mind – did anything pop up without looking at Wikipedia? We thought so.
France's automakers may be quite able at creating successful compact models, but success in premium segments has so far, eluded them - and a supercar is definitely out of the question.
This hasn't stopped their designers from sharpening their pencils on extravagant concepts that grace auto shows all over the world. With the latest event taking place in Paris, something exciting was definitely on the menu.

Peugeot 2008 Soft-Roader Concept Hits at Next Year's Production Model


Besides the 260bhp RCZ R and the Onyx Supercar and Super Scooter models, Peugeot is also displaying a fourth concept model at the 2012 Paris Motor Show, the 2008, which hints at the firm's Nissan Juke rival that will be presented next year.
The 2008 is a follow up to the ‘Urban Crossover Concept’ revealed in Beijing earlier this year with a more vibrant color scheme, but other than that, the two models are identical.

Some Like it Hot: New Peugeot RCZ R Study with 260HP Debuts in Paris


Displayed alongside the regular versions of the mildly refreshed RCZ at the French firm's Paris Auto Salon booth is a thinly disguised prototype of a model that will soon gain the title of the most powerful production model in Peugeot's automobile range.
The study is the RCZ R and it is showcased in Paris in matt black and copper livery that echoes another Peugeot concept unveiled at the show, the ‘Onyx’ supercar.

Scoop: Peugeot Continues Trialing 301 Test Mules


These new spy pictures show a test mule of the Peugeot 308 compact hatchback's replacement being tested in Europe. While the exterior panels of the prototype are from the current 308, underneath it’s a different story as it rides on a new platform with wider front and rear tracks that's shared with the Citroen C4 and DS4 models.
The French firm's new model will likely be named 301, as Peugeot would like to skip the 309 moniker that was used on its 1980s compact hatch.
Like the smaller 208, Peugeot's Golf rival is expected to be both more compact in length and lighter than the model it replaces with obvious benefits in fuel efficiency and CO2 emissions.

Nissan Juke

Nissan Juke is set to change the urban landscape... for the third time. Following in the wheeltracks of the Murano large crossover and then the successful Qashqai - the car that three years ago introduced the concept of a crossover as an alternative to the traditional C-segment hatchback - comes its younger brother, the Nissan Juke.

Designed to bring a breath of fresh air to the B-segment, Nissan Juke is a distinctive combination of SUV toughness and sporting style. Conceived to inject some masculinity and dynamism into the small car market, Nissan Juke combines a number of seeming contradictions beneath its highly individual lines.
"It takes the best elements of an SUV and sports car and combines them," says Pierre Loing, Vice President, Product Planning, Nissan Europe. "It's roomy yet compact, robust yet dynamic and practical yet playful. These are qualities that seem to contradict each other, yet come together in Nissan Juke to create something that's genuinely unique."
Nissan Juke was created at Nissan Design Europe (NDE) in the heart of London, and refined at Nissan's Design Centre (NDC) in Japan. Principle engineering took place in Japan with significant European input and Juke will be built in Nissan's factory in Sunderland in the north-east of England.
"The design shows real optimism. By combining design elements from two genres to create a small, but striking Crossover that displays a genuine confidence and style. And those are qualities we also expect to find in a Nissan Juke customer," said Shiro Nakamura, Senior Vice President for Design and Chief Creative Officer

From a design standpoint, the lower portion of Nissan Juke is pure SUV, with chunky wheels, wide tyres, extended ground clearance and a robust stance. But the top portion is unadulterated sports car, with a high waistline, slim visor-like side glass graphics and a coupé-style falling roofline. The coupé effect is further underlined by the rear doors which have their handles hidden in the frame of the door.
Inside, the sports car theme continues with a driver-focused cabin dominated by a centre console design inspired by a motorcycle fuel tank. Finished in a distinctive high gloss colour, the 'bike' console adds a sense of fun to the car. Practicality is assured by the rear-opening hatch and versatile luggage area with hidden storage opportunities.
Based on the Renault Nissan Alliance B platform, Nissan Juke has a 2530mm wheelbase. On front-wheel drive versions, suspension is by MacPherson struts at the front with a torsion beam at the rear while four-wheel drive models have a multi-link rear suspension modelled on the system found on Qashqai.
The All-Mode 4x4-i is a new development of Nissan's respected electronic all-wheel drive system and now features torque vectoring technology to enhance agility and reduce understeer when cornering.
In Europe, three different engines will be available when sales start later in the year (UK sales begin in October): one diesel and two 1.6-litre petrol units, all fully Euro 5 compliant. At the top of the range is a new turbo-charged petrol engine (MR16DDT) with direct injection. The engine is one of the most powerful in its class, developing 140kW (190PS) and 240 Nm. The combination of direct injection with a turbocharger provides the power and responses expected from a 2.5-litre engine with the economy of a smaller engine.
The second petrol engine is a newly developed version from Nissan's trusted HR-family. Designated HR16DE, the lightweight, low-friction 16-valve unit now has a unique dual injection system allowing finer metering of the fuel sprays for better combustion and develops 86kW (117PS). The K9K 81kW (110PS) 1.5-litre dCi common rail diesel offers excellent driveability - thanks as much to its heady 240 Nm of torque - with good economy and emissions.
In terms of transmissions, the two-wheel drive turbo-charged 1.6-litre petrol engine is available with a six speed manual, while a CVT transmission with a six-speed manual mode will be available on the range-topping all-wheel drive version of the turbo-charged petrol engine.
The naturally aspirated 1.6-litre petrol is available either with a 5-speed manual or the updated XTRONIC CVT and the 1.5-litre diesel engine is available with a 6-speed manual.
Trim and equipment options will follow the established Visia, Acenta and Tekna lines while a full range of accessories has been developed for owners who want to personalise their Nissan Juke still further.
"Nissan Juke is not a traditional B-segment car, and that is quite deliberate. It was born in an urban environment and that is where it will spend most of its life. Fittingly, its combination of agility and toughness make it one of the most streetwise cars around.
"Juke joins Murano and Qashqai to cement Nissan's position as the leading brand in the crossover market," said Simon Thomas, Nissan's European Senior Vice President for Sales and Marketing.
Exterior design
First revealed as the Qazana show car - unveiled at the 2009 Geneva Motor Show - Juke was created at the London-based Nissan Design Europe and refined at Nissan's Design Centre (NDC) in Japan. Qashqai, also created at NDE, is sold in Europe, Asia and Australia while Nissan Juke will be marketed in Europe, Japan and the United States.
"The outcome of this global collaboration is a car that comes from where East meets West, with vital contributions from NDE and NDC being key to creating such a striking design," said Shiro Nakamura.
Its highly individual lines are carried over virtually intact from Qazana. The boldness of the design reflects the significance of the B-segment in the European market: Europe is expected to take the lion's share of sales ahead of the other main markets, including North America and Japan.
The design team drew inspiration for Nissan Juke's design from a number of unusual sources. They looked back at a number of vehicles synonymous with an active and sporting life - and that list included rally cars and motorbikes. It's clear to see where those ideas have influenced the design.
The result combines a number of different themes, but with Nissan DNA threaded through. It has a tough solid body to reflect the SUV element, yet is a very sensual car, too, with complex curves and a coupé profile accentuated by the narrow side glass and hidden rear door handles which help give the impression of two rather than four doors.
But there is also clear Nissan family DNA in the design - the boomerang rear lights, for example, from the 370Z - but none of the elements are slavishly copied so while retaining Nissan DNA, Juke stands alone as a unique, almost maverick, design.
This is a key theme running through Nissan designs. Alfonso Albaisa, Vice President, Nissan Design Europe, says: "Nissan Juke has elements inspired from other cars in our range such as 370Z and even Cube, but our intention is never to make obvious links between our cars but natural ones. Cube is a cool car, for example, and that coolness can also be found in Nissan Juke."
With generous ground clearance, big wheels and tyres, a high waistline and a broad shoulder line, the bottom 'half' of the car appears to be pure SUV. The impression is accentuated by typical SUV features such as the contrasting black sill and wheel arch finishers while at the front and rear, the lower bodywork emerges from underneath the car, resembling underbody protection.
At the front, the 'sump guard' forms part of the air intake assembly but rather than use a simple meshed grille, the design team have developed the moulding into a series of circular slots… which are suggestive of biotic elements.
Above the waistline, however, Nissan Juke shows its sporting credentials. A heavily raked windscreen, complete with Nissan's signature Crossover upswept flick to the rearmost side window - and sloped roof-line provide a profile reminiscent of an aircraft's canopy.
The rear of the roof incorporates an integral spoiler to reduce aerodynamic lift to help high speed stability. The neat duck-tail ridge was perfected with computational fluid dynamics (CFD) and tests in the wind tunnel.
The lights also reflect the car's sporting agility. At the front these are split into two distinct elements. Framing the upper half of the bonnet, thin slashes contain running lights and turn indicators, while the main and dipped beams mounted lower on the nose of the car were inspired by the auxiliary lamps fitted to rally cars in the sixties and seventies. At the rear, the tail-lights put their own spin on the boomerang shaped lamps found on the 370Z.
In total, a nine colour palette of exterior colours is planned, including two whites, a solid and a pearl, and three shades unique to Nissan Juke - Force Red, Haptic Blue and Machine Brown, though the total availability will depend on region.
Seiji Watanabe, Associate Product Chief Designer: "We want our cars, our crossovers in particular, to have a spirit of agility, to be seen as light, nimble, reactive. Nissan Juke displays all these attributes and delivers a real sense of optimism."
Interior design
Nissan Juke's active, sporting exterior is matched by its interior… where the dominant feature also displays a sense of fun: the centre console, finished in a high gloss paint, resembles a motorcycle fuel tank.
"It's unexpected," says Alfonso Albaisa. "And that gives the interior a certain sexiness."
Reflecting the exterior's blending of SUV and sports car attributes, the interior provides the commanding driving position but with all the attributes expected of a sports car. The gear shift sits on the top of the 'motorbiketank' to guarantee slick changes while the tank itself is no mere styling statement but also provides a bracing point for the driver's knee during spirited cornering.
Similarly, the central stack - which incorporates the new Nissan Dynamic Control System - is ergonomically designed to ensure the driver has instant access to the information and drive mode controls.
Attention to detail is evident everywhere. Chrome fittings and high quality materials are used throughout while the interior colours - red or gun metal grey for the central console are available, depending on the grade; black, silver or red accents to the leather or honeycomb 'sports' fabrics - underscore the car's sporting attitude. Even the door arm rests, shaped like flippers used by scuba divers, reflect an active outlook.
Despite its overall compact dimensions, the roomy interior offers competitive levels of space inside: front head room and rear knee room will be sufficient for most occupants. Unlike the Qazana show car, Nissan Juke is a full five seater.
The practical luggage area is large enough to take a nine inch golf bag or a maximum size suitcase and it also includes an underfloor storage area (4wd versions excepted) which takes its potential capacity to 251 litres (VDA). In addition, the rear seats split 60:40, and also fold in one simple movement to provide a totally flat loading floor.
To hide luggage away from prying eyes, the trunk area has an integral tonneau cover which differs from the conventional by being attached to the tailgate and rises with the door when the trunk is opened.
"The interior displays a number of attributes which really sum up the entire car. There's a lot of emotion here, a real sense of fun and a genuine quality," says Albaisa.
Platform
Nissan Juke is based on Renault Nissan Alliance B-Platform and has a 2530mm wheelbase, is 4135mm long, 1765mm wide and 1570mm tall. To allow the top of the range to use 17-inch wheels and 215/55 R17 tyres, the track front and rear is 1525mm, the widest yet seen on the Alliance B-platform.
As new models evolve so a platform will undergo a number of changes, and Nissan Juke's underpinnings are no exception. For its application on Nissan Juke, it has been lengthened, widened and significantly strengthened and lightened to enhance safety, refinement, and fuel efficiency.
Although the basic suspension system mirrors that found on other B-segment cars, with MacPherson struts at the front and a torsion beam at the back, a new cradle-type front subframe has enhanced the lateral stiffness of the assembly. Along with revised front suspension geometry, this has helped to promote better handling and ride comfort along with greater refinement.
The 4wd versions of Nissan Juke further benefit from a new multi-link rear suspension. When coupled to Nissan's newly developed torque vectoring four-wheel drive technology to limit understeer, Nissan Juke's handling is at the top of the class in spite of its higher ground clearance while comfort has been preserved.
In an urban environment, the combination of higher ground clearance and large tyres mean that speed bumps and poor road surfaces will not cause as much discomfort - or damage - as they would to a conventional sports hatchback.
Despite its SUV looks and the comparatively high eye-point, Nissan Juke's front and rear roll centre heights are as low as possible - closer to a conventional hatchback than a typical SUV - to reduce body roll in corners.
Agile handling is also helped by speed sensitive electric power steering, standard on all models, and by increased upper body strength and stiffness. Nissan Juke incorporates a newly developed ring structure which connects the upper body to the rear suspension, thus increasing torsional rigidity.
Engines and drivetrains
In Europe, there will be three engine and manual or CVT transmission choices when Nissan Juke sales start in the second half of 2010. At the top of the range is a newly developed 1.6-litre Direct Injection Gasoline turbocharged engine which develops 140kW (190PS) and 240Nm.
A low friction and lightweight design, the 16 valve engine uses direct injection to improve combustion to optimise power and torque, economy and emissions. The addition of a turbocharger and intercooler helps to boost power - this engine is one of the most powerful in its class - while variable timing control for both intake and exhaust cycles (twin VTC) improves low end engine response. A degree of overlap allows exhaust gas recirculation.
Low friction techniques include the adoption of diamond-like carbon (DLC) coating for the valve lifters and mirror finish camshafts. The result is an engine delivering the performance levels of a normally aspirated 2.5-litre engine but with the fuel economy of a smaller engine.
The Direct Injection Gasoline engine in two-wheel drive versions of Nissan Juke will be coupled to a six-speed manual transmission. On the four-wheel drive version, it will be mated to Nissan's XTRONIC CVT transmission, with six-speed manual mode.
The second petrol engine, which also displaces 1.6-litres and has four valves per cylinder, is an extensively reworked member of the HR family. Designated HR16DE, it has undergone a number of significant changes with a larger exhaust manifold, a retuned intake manifold, twin VTC, improved intake tumble flow and new catalyst with a hexagon cell formation.
New pistons with revised crowns and integral oil jet cooling have been adopted along with low friction techniques such as diamond-like carbon coating on the valve lifters.
But the most significant change has been the development of a dual injector system - a world first - which has two injectors for each cylinder, each with smaller nozzles to deliver finer, more closely targeted sprays of fuel into the cylinders for more efficient atomisation and more complete combustion.
Together the changes have led to significant improvements in power, torque and fuel economy. The engine produces 86kW (117PS), representing a six per cent improvement over previous versions of the engine. Torque has improved by three per cent to 157Nm while economy figures show a 5.6 per cent improvement. The normally aspirated petrol engine powers two-wheel drive versions only, and will be available with either the five-speed manual or the updated XTRONIC CVT transmission option, a different CVT transmission to the one used with the DIG engine.
The final engine choice is the familiar Alliance developed K9K 1.5-litre dCi turbocharged common rail diesel. The 1,461cc eight-valve engine delivers good fuel economy, low emissions and running costs with excellent driveability.
With power rated at 81kW (110PS) at 4,000 rpm and torque at an impressive 240 Nm at 1,750 rpm this unit features a fuel return rail and control unit for improved fuel efficiency. Injection pressure is 1,600 bar. Improved glow plug performance speeds up cold start performance. Emission control systems include a diesel particulate filter (DPF), with a fifth injector for regeneration and cooled exhaust gas recirculation while the turbocharger layout altered to make the distance between it and the DPF as short as possible.
The diesel will be available on two-wheel drive models with the six-speed manual transmission. For Europe, all the engines are fully Euro 5 compliant.
While the manual transmission has been carried over largely unchanged from Qashqai, both XTRONIC CVT systems feature a number of key technologies that promise significant improvements in weight, packaging, performance and fuel efficiency.
The updated XTRONIC CVT unit, used with the conventional 1.6-litre petrol engine, is 10 per cent shorter than before and 13 per cent lighter while internal friction has been reduced by a remarkable 30 per cent. This unit is the world's first CVT with a sub planetary gear which allows a far higher transmission ratio - 7.3:1 - than previous Nissan CVTs. Smaller, lighter pulleys, a flexible lock up damper and a more efficient oil pump all promote great fuel efficiency.
The XTRONIC CVT with 6-speed manual mode in the turbocharged petrol-engined Nissan Juke has been tuned for a more sporting performance with revised manual modes for sharper acceleration while the management system has been reprogrammed to enhance fuel efficiency. Both CVTs have adaptive shift control systems that can be selected via the Nissan Dynamic Control System.
Unusually in its class, Nissan Juke will be available with the option of four-wheel drive in addition to conventional front-wheel drive. A newly developed all-wheel drive system is based on Nissan's ALL-MODE 4x4-i electronic technology but which now adds a lateral torque-vectoring capability to its armoury.
As well splitting torque front to rear - upto a maximum of 50:50, it can now be split from side to side across the rear axle, too. By monitoring vehicle speed, wheel speed, gear position, steering angle, lateral G forces and now vehicle yaw rate, torque distribution can be increased to the outside rear wheel in corners to cut understeer and enhance the car's cornering ability. In total, upto 50% of the total available engine torque can be sent to either rear wheel.
The new rear axle incorporates electric couplings at either end plus a new final drive The inclusion of this innovation is a first in the small car segment - a technology that has, until now, only been found on top-of-the-range, premium vehicles.
The new system is noticeably lighter and more compact than similar systems used by some other manufacturers.
Equipment and model lines
Just about the only conventional aspect to Nissan Juke is the model line-up, which follows Nissan's established Visia, Acenta and Tekna lines. Lists of standard and optional equipment will be released nearer the on sale date, but expected items such as climate control, leather upholstery, rear view camera and Intelligent Key will all be available to Nissan Juke customers along with some more unusual features.
One such is Nissan Dynamic Control System, a central command and display module which allows the driver to alter dynamic drive settings as well as make changes to more obvious functions such as climate control.
Cleverly, the module adopts different displays, colours and functions depending on how it is being used. In Climate mode, the display shows the interior temperature setting while the 'buttons' display air-flow preferences.
But in D-Mode, the buttons change to Normal, Sport and Eco driving modes, altering throttle maps, torque availability, CVT shift schedules, steering effort and even air conditioning performance to suit the conditions. The display, meanwhile, shows engine and drive related dials and information.
Car settings, such as the sensitivity of automatic headlights, can also be adjusted via the system, while the display changes colour to signify what type of information is being displayed. Driving information incorporates panels giving average speed, fuel economy, journey times and so on. Overall, the display is designed to add a feeling of cool, engaging technology to the interior.
Accessories
Although Nissan Juke has a long list of standard equipment, Nissan has developed a full range of accessories enabling owners to personalise their cars still further. Among the items on offer are different designs of alloy wheel as well as front and rear under body protectors to accentuate the SUV element of the design.
Other exterior features include exhaust finishers, a roof spoiler and wind deflectors on the doors, while inside an owner can add illuminated door sills and interior accent lighting. Practical touches include advanced security systems as well as extra storage opportunities in the front armrest and in the luggage area.
European Customers
"The incredible success of our Qashqai compact crossover - we've recently passed half a million sales in Europe alone - has shown that customers are fed up with conventional cars. Nissan Juke is even bolder, even more adventurous than Qashqai and is set to confirm Nissan's position as a pioneer of crossover in Europe and, indeed, globally," says Simon Thomas.
Nissan Juke has been conceived with the specific intention to fulfil unmet customer expectations by adding much dynamism and masculinity to the sober, safe small car market. Who does Nissan imagine will buy Juke in Europe?
Clearly Urbanite, male customers are expected to be predominant but a significant proportion of buyers are anticipated to be women - one third according to Nissan's estimates. Nissan Juke will attract a younger audience than average Nissan customers (under half will be below 40), these estimates shows that Nissan Juke will have a broad appeal, supporting Nissan's research that there is widespread disillusionment at the lack of excitement in the small car sector in Europe.
Sales of Nissan Juke will come largely from the B-segment and is also expecting to attract C-segment customers, with people trading down to enjoy something more radical and inspirational. As with the successful Nissan Qashqai, a large majority of Nissan Juke customers will be new to the Nissan brand.

Peugeot 308 SW

he new Peugeot 308 comes with a new look, features innovative e-HDi micro-hybrid technology and optimises fuel consumption and CO2 emissions, which start from just 98 g/km.
With its new lines, the Peugeot 308 subtly incorporates the Marque's latest stylistic codes. The car's body follows the contours of the mechanical assembly underneath. The appeal of the three body shapes (Saloon, CC and SW) thus acquires a more technological elegance, illustrated by the presence of LED front lights with light guide. Dynamism and emotion are present as ever in the genes of the 308, particularly with its more assertive look thanks to new Xenon headlamps with titanium coloured mask and the hatchback in its exclusive GTi finish.

Determined to consolidate its leadership in terms of road holding and driving pleasure, the Peugeot 308 seeks to become a reference in terms of environmental efficiency. Indeed, following in the footsteps of the 508, the new Peugeot 308 features innovative e-HDi micro-hybrid technology, the latest generation STOP & START, on the 1.6 litre HDi FAP 112 bhp Euro 5 engine. This offer, on the "entry level" engine, is available with a semi-automatic manual gearbox and, for the first time, with a full manual gearbox, for optimal driveability.

In addition to micro-hybrid technology, all factors impacting the level of CO2 emissions have been optimised:
  • weight reduced by 25 kg on average per car;
  • launch of 16" tyres with Very Low Rolling Resistance;
  • optimisation of the latest generation engines (VTi, THP, HDi Euro 5);
  • Cx of 0.28 for versions with a low fuel consumption - A record in the segment.
Fuel consumption sets the standard:
  • 98 g/km of CO2 for the 308 saloon 1.6 litre e-HDi FAP 112 bhp BMP6 - A record in the segment
  • available power trains, comprising 4 petrol engines ranging from 98 bhp to 200 bhp for the exclusive GTi version and 4 diesel engines from 92 bhp to 163 bhp, have also been optimised to ensure a comprehensive range of engines guaranteeing environmental efficiency. As a result, the basic version - the 308 saloon 1.6 litre HDi FAP 92 bhp with manual gearbox - is well positioned, with CO2 emissions reduced to only 110 g/km.
The dimensions and quality of equipment on the new Peugeot 308 remain unchanged, regardless of body shape, guaranteeing a spacious and comfortable passenger compartment. The same is true of primary, secondary and tertiary safety, which remain at the highest level.
The new Peugeot 308 will receive its world premiere at the 2011 Geneva Motor Show and will go on sale from April 2011 in Europe. Its mission is to continue the success story of the 308 family, with nearly 900,000 models sold since its launch in September 2007.
ELEGANT LINES ENHANCED BY ADVANCED TECHNOLOGY
The design of the new Peugeot 308 subtly incorporates the new stylistic codes of the Peugeot Marque. While the dimensions are unchanged, the new lines marry as closely as possible the car's mechanical assembly to accentuate its athletic poise, while the front aspect gives a fresh look to the "floating" front grille concept. Greater importance accorded to unbroken surfaces marks a determination to present an elegant and luxurious style. The central protective capping, available in a black lacquer finish, has been made thinner to give greater prominence to the sheer metal. This is also true of the single air intake which is now smaller in size.
Styling elements enhance the natural elegance which emanates from the new 308. A satin chrome bead enhances the new front grille, as do horizontal bars, available in lustrous black or chrome according to body shape (saloon, CC or SW).
The bottom section of the lower front panel, which helps visually to broaden the car and "plant" it on the road, incorporates new dual-function lights (daytime and sidelights) shaped like a boomerang, available according to versions. With their meticulous finish, they blend perfectly and are harmoniously positioned on the upper surround of the fog light housing. Composed of variable intensity LEDs and a light guide, they guarantee a unique visual signature by day and by night while illustrating the high level of technology featured on the new 308.
In the upper section, the V-shaped nose of the bonnet is one of the main expressive features of the Peugeot 308. It has been redesigned to fit the car's mechanical assembly as closely as possible and provides a new link with the floating front grille, in line with Peugeot's new stylistic codes. The Marque badge, in its new dual material construction, is proudly positioned at the tip of the bonnet on a new black lacquer base set with a chrome bead, also in the shape of a V.
The outline of this nose, fluid and characteristic, is more curvaceous, particularly at the junction of the lights and the bonnet. The new smooth glass front headlamps, closely fitting the three cylinders, suggest a look that is both refined and assertive. And when the 308 is equipped with dynamic bi-directional Xenon headlamps complete with titanium coloured base, this look becomes even more profound, displaying all the strength of character of the new 308.
The dynamism of the front aspect is echoed on the sides of the car. A styling line, running from the front wheel arches, crosses the side of the body and the rear lights before dropping towards the lower rear panel and coming to an end in the lower section.
The fluidity of the style is enhanced by the lateral glazed surface which follows a plunging waistline, and also by the panoramic rear window, which overlaps the rear quarter panel pillars.
Lastly, to establish the general appearance of the Peugeot 308, a lower waistline starting from the lower front panel extends as far as the rear bumper. The car therefore seems well poised on the road, ready to exploit its dynamic qualities to the full . New diamanté effect 16 or 17 inch alloy wheels or Storm Grey 18 inch wheels for the GTi version underline this dynamic appeal. The sense of dynamism is enhanced further by the car's rear style.
On the saloon, the wraparound lower rear panel adds a note of robustness and perceived quality as well as a sporty touch thanks to the presence of a styling element in the shape of a spoiler and two inserts, which can have a chrome finish, suggesting exhaust nozzles. The new Lion takes its place in the centre of the tailgate, while a satin chrome bead emphasizes the horizontal waistline, bringing a new balance to the rear of the 308.
On the SW, the contours of the robust lower panel and the rear lights have been designed to allow a wide boot aperture. The low load sill resulting from this design promises easy loading and a large internal capacity. From an aesthetic point of view, a horizontal waistline runs around the rear tailgate in its central section to "stretch" the car. This sensation is amplified by the body-coloured number plate insert surmounted by the new Lion badge.
On the CC the strength of the rear style is repeated, with a sense of horizontality given to the rear aspect that reinforces the impression of width. Numerous details add to this overall effect: the concave movement crossing the tailgate under the spoiler, the chrome bead framing the number plate and the presence of an air diffuser in the lower section. On either side and extending over the wings, the ruby-coloured LED rear lights with light curtain effect broaden the silhouette and give the 308 CC a unique and spectacular visual signature.
A FLUID AND LUXURIOUS INTERIOR
Stylists worked hard to exploit to the full the interior volumes freed up by the semi-tall architecture of the Peugeot 308. They therefore designed a particularly inclined fascia panel, almost symmetrical to the front windscreen pillars, to offer unimpeded exterior visibility.
In addition, there was a marked determination to give the interior a very upmarket feel and an enhanced sense of perceived quality. The result is a fluid, pure and elegant fascia panel where pride of place is given to superior materials, according to finish: soft covering, leather trim, chrome, black lacquered materials... The care given to the finish and the emphasis on interior comfort are evident in every detail. According to the level in the range, new motifs decorate the door panel strips, panel trim, thumb rests on the steering wheel, etc. Similarly, the special seats on the GTi version have red visible stitching with specific marking on top of the seat back and an aluminium steering wheel ring showing the word "GTi". Dark-tinted rear windows combined with dark wheel trims (Storm Grey) and the titanium mask of the discharge lamps, give this version a sporty and assertive identity, perfectly in keeping with the dynamic potential of its 1.6 litre THP 200 bhp engine.
Inside the 308 CC, the eye is caught also by the elegance of the 4 seats with integral head restraints and the possibility of full leather trim on the fascia panel, in different shades, which convey a touring car image. This distinctive design makes for even more comfortable seats with an Airwave warm air diffuser behind the necks of the front passengers. The pleasure of open-top driving is thus enhanced.
A SPACIOUS AND BRIGHT PASSENGER CO MPARTMENT
The passenger compartment has been designed to ensure that a sense of space and brightness predominates, making occupants feel they don't want their journey to end.
The interior dimensions and efforts by the designers to free up as much space as possible for passenger comfort make the 308 one of the most spacious cars in its segment.
Elbow width at the front is 1464 mm for the saloon and SW body shapes, and rises to 1492 mm for the Coupé Cabriolet version. At the rear, these dimensions are respectively 1471 mm and 1321 mm for the CC. The feeling of space is even more noticeable on account of the many clever storage spaces available inside the Peugeot 308. Total storage capacity is 42 litres, making life inside the car easier and preserving space for the occupants.
All of the 7 passengers that can be seated in the 308 SW thanks to the optional additional 2 rear seats can benefit from these fitted spaces. They can also modulate and adjust the car's interior as necessary by opting for individual seats in row 2. Nor has the boot volume been ignored, with a capacity under the parcel shelf of 674 litres for the SW and 430 litres for the saloon. With the load potential exploited to the full, the capacities are 2149 and 1398 litres respectively.
On the CC, all four passengers can benefit from the availability of a large boot capacity (465 litres) in the coupé configuration. On the cabriolet, with the retractable roof stored in the boot, the boot still offers a capacity of 266 litres. What's more, it only takes 20 seconds to convert the 308 CC into a dynamic coupé or an elegant cabriolet.
Passengers in the Peugeot 308 saloon and SW will also be able to benefit from a "sunny" passenger compartment thanks to the panoramic roofs available for these body shapes. They increase the total glazed surface area to 4.86 m² on the saloon and 5.58 m² on the SW. The light level inside the car can be regulated by means of an electrically-operated roller blind associated with this equipment.
To make the journey even more pleasant, automatic dual-zone air conditioning is available. With its active charcoal filter, it also reduces hydrocarbon odours inside the passenger compartment.
Finally, passengers will be able to benefit from a high quality audio and telematics system: WIP Sound audio system, Bluetooth hands-free kit, WIP Nav satellite navigation and WIP Com 3D with a retractable 7" 16/9 colour display. A JBL hi-fi system is also available and may be combined with laminated side windows for optimal acoustic performance.
Regardless of body shape, the new 308 offers a high level of comfort and convenience.
REDUCTION OF CO2
The reduction of CO2 emissions was one of the main objectives of this project. This resulted in a search for environmental efficiency at all levels. All factors influencing fuel consumption were optimised:
  • weight reduced by 25 kg on average per car;
  • launch of 16" tyres with Very Low Rolling Resistance;
  • use of a piloted oil pump on 1.6 litre HDi engines;
  • optimisation of operation of the alternator on some engines;
  • improvement of power steering control (electropump unit);
  • Cx of 0.28 for versions with a low fuel consumption - a record in the segment;
  • e-HDi micro-hybrid technology;
  • 98 g/km of CO2 for the 1.6 litre e-HDi FAP 112 bhp BMP6 version - a record in the segment
e-HDi MICRO-HYBRID TECHNOLOGY
After the 508, the new Peugeot 308 is the second of the Marque's cars to introduce the innovative e-HDi micro-hybrid technology, a new generation STOP & START.
This innovation is based on the combination of a 1.6 litre HDi Euro 5 diesel engine and a reversible alternator ensuring the STOP & START function. Relying on an alternator control system (Volt Control) to recover energy during deceleration and a hybrid battery to store and deliver additional energy on startup (e-booster), the HDi unit allows:
  • a 15% reduction in fuel consumption in urban traffic;
  • a 5 g/km reduction in CO2 emissions for approved cycle fuel consumption;
  • 40% faster restarting (400 ms) than with an enhanced starter STOP & START;
  • activation of engine cut-out from 20 km/h with a manual gearbox (8 km/h for the electronicallycontrolled gearbox);
  • increased driveability of the STOP & START (silent operation, no vibrations).
The second-generation reversible alternator used here has a power of 2.2 kW and allows up to 600,000 restarts. However the STOP & START function can be de-activated by the driver if preferred by means of a button on the fascia panel.
1.6 LITRE e-HDI FA P 112 BHP ENGINE
To deploy this technology on a large scale, the new Peugeot 308 proposes e-HDi technology with a "basic" engine, the 1.6 litre HDi FAP 112 bhp, which can be coupled with two gearboxes (manual or electronicallycontrolled). This is a first, since hitherto e-HDi technology was available only with the BVMP6 electronically-controlled gearbox. This new offer maximises driving enjoyment by increasing the phases of driving "in silence". When coupled with a manual gearbox, engine cut-out is possible from a speed of 20 km/h.
A CO MPREHENSIVE RANGE OF LATEST-GENERATION ENGINES
To reduce CO2 emissions as much as possible, the new 308 is uniquely equipped with the very latestgeneration engines for both petrol (VTi or THP engines) and diesel versions (new HDi Euro 5 engines).
On the saloon, all 8 available engines, as well as different possible gearbox combinations (manual, electronically-controlled manual or automatic), will allow every customer to find the version that suits them best.
4 Euro 5 petrol engines:
  • 1.4 litre VTi 98 bhp with 5-speed manual gearbox;
  • 1.6 litre VTi 120 bhp with 5-speed manual gearbox or automatic gearbox;
  • 1.6 litre THP 156 bhp with 6-speed manual gearbox or automatic gearbox;
  • 1.6 litre THP 200 bhp with 6-speed manual gearbox (exclusive to GTi version).
4 Euro 5 diesel engines:
  • 1.6 litre HDi FAP 92 bhp with 5-speed manual gearbox;
  • 1.6 litre e-HDi FAP 112 bhp with 6-speed manual gearbox or electronically-controlled manual gearbox;
  • 2.0 litre HDi FAP 150 bhp with 6-speed manual gearbox;
  • 2.0 litre HDi FAP 163 bhp with automatic gearbox or 6-speed manual gearbox (only on the 308 CC).
PEUGEOT KNOW-HOW
True to the Marque's values in terms of driving pleasure, the new Peugeot 308 seeks also to preserve its leadership in terms of road holding. The features that make the 308 a reference are maintained:
  • rigid body structure;
  • McPherson type front suspension;
  • rear suspension with torsion beam;
  • hydraulic dampers with valves;
  • power steering with variable assistance piloted by an electro-pump unit;
  • large disc brakes (ventilated at the front) - up to 302 x 26 mm;
  • ABS, electronic brake force distribution, emergency brake assist and automatic switching on of hazard warning lights as standard;
  • Bosch 8.1 ESP according to versions.
HIGH LEVEL SAFETY ON AL CO UNTS
Whether in terms of primary, secondary or tertiary safety, the new 308 is positioned at the highest level.
Firstly, the excellent rigidity of the structure ensures optimal operation of the wheels and suspension ensuring a high level of primary safety. In terms of secondary safety, the structure itself has been rigorously designed to withstand even the most severe impact, thanks in particular to a triple force channel at the front. The use of high-strength steel and "multilayer" reinforcements in specific areas has made it possible to raise the level of safety of occupants while reducing the overall weight of the car. In addition to the performance of the structure, efficient means of restraint are proposed:
  • up to 8 air bags on the saloon and SW;
  • up to 6 air bags on the CC, including 2 head air bags at the front;
  • extractible safety hoops on the CC in the event of rollover;
  • 3-point seat belts with belt not fastened or unfastened acoustic warnings;
  • Isofix fixtures.
Lastly, with regard to tertiary safety, the new Peugeot 308 benefits from Peugeot Connect services. Occupants are put through to an assistance helpline when an emergency call is made (Peugeot Connect SOS) or a breakdown service in the case of a mechanical incident (Peugeot Connect Assistance). These services are available via a Peugeot Connect unit or with the top-of-the-range WIP Com 3D telematics offer.

New Peugeot 508 Officially Unveiled, gets HYbrid4 Variant with 200HP and AWD


The all-new Peugeot 508 has been officially revealed following the leakout of the first photos earlier today. Available in sedan and station wagon body styles, the 508 replaces two cars in Peugeot's range, the 407 and 607. The French marque's Ford Mondeo and Volkswagen Passat contender will make its world debut at the Paris Motor Show in late September and go on sale early next year.

The 508 is the production version of the '5 by Peugeot' concept car seen in Geneva this past March, and according to Peugeot, it introduces the firm's new -and more subtle- design language as previewed on the SR1 Concept sports car. Expect to see the same type of grille finding its way on all future Peugeot models.

For the first time we get a look at the 508's interior, which according to the French carmaker, combines hi-tech features with the use of "high quality materials" both "visually and to the touch".

New Peugeot 508 Sedan and SW: First Official Photos


Say 'bonjour' to the all-new Peugeot 508, the first official pictures of which were leaked onto the web today. Designed to replace both the Opel Insignia-challenging 407 and the larger 607, the French automaker's new mid-size contender will have its first public outing at the Paris Motor Show at the end of September, and go on sale across Europe and other markets early next year.

Peugeot previewed the new 508 at this year's edition of the Geneva Salon with a concept sedan model, called the "5 by Peugeot". The production version has remained more or less true to the concept car

Along with the first photos of the sleek-looking sedan, we also have pictures of its load-loving station wagon brethren that will cater the needs of those looking for a more practical and possibly more spacious proposal in the mid-size segment.
 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. Various Cars UK - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger